中国·永利y23455(股份)有限公司

The LargeRotoSonic hosts the LS 50K, with simultaneous vibration and rotation, so the full Sonic force is utilized which enables you to reach greater depths. This rig is state of the art technology and designed to face the most challenging project conditions in the world. 

When implementing the LRS you have larger drill pipes at your disposal. Also, it is possible to take larger diameter high quality samples at a higher rate per day. All aspects that make the LRS suited for a variety of special projects. From Geotechnical drilling to Sonic sampling for mining and mineral exploration, the LRS makes the difference.

With safety features as the Fully automated rod or casing handler and triple floatable clamp the LRS also provides a safe and ergonomic working method. See specification sheet for more safety features. 

LargeRotoSonic drill head    (full specification sheet)

• LargeSonic (50k) drill head including tilt frame
• 50.000 lbs of sonic output force
• 0-150 Hz Sonic frequency
• 0-140 RPM rotation
• 5250 ft-lb CW rotation torque @ 0-140 RPM
• 7000 ft-lb CCW rotation torque @ 0-140 RPM
• 0-90 degr. tilt capacity

Rig

• Dimension depending on options
• Heigth (when drilling) max 100.00 mm / 32'11''
• CAT 6 cylinder water cooled diesel engine 216 kW / 355 HP
• Fuel tank 190 liter / 50 gallon
• Load sense hydraulic system
• Control panel on turning arm
• High pressure water pump 19 l/min @ 210 bar / 5 gpm @ 3045 PSI
• FMC Bean Mud pump 160 l/min @ 45 bar / 42 gpm @ 652 PSI
• Aluminum water tank 500 liter / 132 gallon
• Rubber tracks
• Radio remote for driving with charger and 2 batteries
• Working lights

Fully automated rod or casing handler

• Mechanical separators among different rod layers
• Casing or drill rod storage depends on diameter and length

Mast

• Stroke 5200 mm / 17’ stroke
• Mast dump 1200 mm / 3’ 11”
• Pull up 120 kN / 26977 lbf
• Pull down 80 kN / 17984 lbf
• Pull up & down speed 45 m/min / 147 ft/min
• Double hydraulic break out clamp 60 - 350 mm / 2-3/8” - 13-7/8”
• Adjustable clamping force of 250 kN / 562002 lbf
• Break out torque 78 kNm / 57530 ft-lbf
• Hydraulic break out cylinder

Winch

• Wireline winch 2250 ft-lbf, speed 328’ / min 328’ cable