Main Features:
Touch screen CPU control allows for easy set-up including carriage speed and retraction sequence
Intelligent system with adjustable limit switches allow for repetitive cuts with minimal carriage overtravel saving time
Protection cabinet with several automatic locking access doors to ensure unparalleled safety and clean operation in laboratory environments.
Slab and prism of any shape and dimensions can be sawn without additional accessories (see table for maximum dimensions)
Pneumatic clamping of prisms and cores
Compressed air gun for cleaning specimens and sawing system
Easy spacer system allows precise preparation of beams or cores
Automatic advance and retraction of saw blade to home position
Adjustable cutting speed for optimum specimen finish and throughput
Numerous interlocks to ensure operator safety
Motor features dynamic braking to immediately stop while switched off
Motor mounted on twin chrome-plated steel rails with sealed bearings
Stainless steel water collection pan
Unique clamping mechanism for cylindrical specimens minimizes specimen damage. Use of a sacrificial PVC tube produces a superior finish and minimizes edge chipping
Jig for round cores, 100 or 150 mm dia, with both automatic or manual feeding of the sample, length up to 200 mm, and jig for 200 mm dia. cores with manual feeding
Quick and easy specimen set-up
GENERAL DESCRIPTION
The cutting machines proposed in the market are normally standard saws for field use in the building industry, modified to clamp and to cut samples. They do not assure the rigidity and stability to obtain precisely specimens for laboratory use. For this reason we have designed and produced specifically designed Asphalt saws to fulfill the stringent requirements of the relevant Standards and, consequently, of the Research and Central laboratories.
The Autosaw is an automated specimen clamping and sawing system for fast, accurate cutting of beams from asphalt prisms prepared in the PReSBOX or slab compactor and for trimming cylinders from GALILEO, GYROCOMP, SERVOPAC and other gyratory compactors. An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position automatically. The Autosaw includes the multislab jig. Completed with the suitable accessory, can be used to cut also asphalt cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request). Cutting speed is operator selectable for optimum specimen finish and throughput. The asphalt saw allows an easy-to-use sawing systems for fast, accurate cutting of beams for asphalt prisms to be used in the different tests. Complete with table and clamping device for slabs, water pump for cooling the blade and filtering system.
The Autosaw can be used as part of your Superpave performance based testing program.
Technical Specifications:
Blade diameter: 650 mm
Max cutting depth: 200 mm
Cores*: 100, 150 or 200 mm dia.
Prism length*: Max 500 mm
Accuracy: Length, perpendicularity and flatness +/-1% max., according to Standards
Blade speed: 1400-1680 rpm (50/60 Hz)
Blade traverse: 0-200 mm/min (variable speed)
Blade retraction traverse: 0-999 mm/min (variable speed)
Air supply for clamping: 700 kPa min
Cutting advancement: Automatic speed control with variable stop and retract control sensors
Cooling: Water recirculation pump and stainless steel tank (included)
Power supply: 5 kW
Voltage: 400 V, 50 Hz, 3 ph or 220 V, 60 Hz, 3 ph
Dimensions (l x w x h): 2000 x 800 x 1700 mm
Weight: approx. 650 kg
* Models suitable for cores 38 to 200 mm dia. and prisms up to 700 mm, available on request
Application
Cutting of prisms and slabs to be used in Four Point Beam Bending tests according to EN 12697-24D and 26B and AASHTO T321
Cutting of trapezoidal specimens to be used in Two Point Beam Bending tests according to EN 12697-24A and 26A
Cutting AMPT cylindrical specimens round cores
Cutting TSRST specimens according to EN 12697-46 and AASHTO TP10
Cutting and dressing of Wheel Tracking slabs or cores according to EN 12697-22 and AASHTO T324
Cutting Prall test specimens according to EN 12697-16
Cutting Overlay test specimens according to TX-248-F
Cutting Semi-Circular Bend test specimens according to EN 12697-44 (except for the notch)
Cutting accurately 100, 150 and 200mm dia. cylindrical cores to different lenghts.
Enquiry:hkmarketing@epc.com.hk 
Whatsapp Enquiry: +85261990717
