中国·永利y23455(股份)有限公司

EPC Products Teaching and Research Laboratory Equipment Educational Food Technology FT18-MkII Modular Cross Flow Filtration
产品中心
FT18-MkII Modular Cross Flow Filtration

Model:FT18-MkII

Use:

Standard:

Related Products

Description

The system uses a high-pressure piston-recirculation pump to circulate product through the filter module of choice. 

The variable speed triplepiston design combined with high-pressure flexibles minimises pressurepulsation. 

The operator can use their own feed vessel or this can be specified (FT18-20 option). The speed of the recirculation pump can

be adjusted to suit the particular filtration module and the product.
A level sensor mounted on the pump inlet protects the pump from running dry.
The retentate back-pressure valve enables pressures up to 40 bar to be achieved. Accidental system over-pressure is avoided by a
downstream of the recirculation pump.
There is a permeate back-pressure valve so that accurate transmembrane pressures (TMP) can be set. Pressure sensors are sited
on the retentate side on the inlet and outlet of the filter module, as well as on the permeate side. Any temperature gain in the retentate through
recirculation at high pressure is removed using a 316 stainless steel shell and tube heat exchanger, which has corrugated tubes for improved
heat transfer.
The transmembrane pressure can be finely controlled with independent back pressure valves. This reduces the fouling on the membrane when

operating at higher pressures, extending the lifetime of the membrane.



Technical specifcations
Max flow rate 1400 l/hr
Max operating pressure 40 bar
Pressure sensors 0-60 bar
Mass balance range 0-6kg

Overall dimensions
Length 0.72m
Width 1.00m
Height 1.50m
Packed and crated shipping specifcations
Volume 1.9m3
Gross weight 300kg




Project Case
Solution
Download
相关标签
Armfield,FT18-MkII,Modular Cross Flow Filtration
XML 地图
XML 地图